Doors and Window installations
Tillowbuilt specialises in expert window and door installations across Sydney. Whether it's a modern upgrade or a full fit-out, we deliver precision, reliability, and quality craftsmanship—every time.
Installation Tips & Tricks (Australia)
1. Measure Twice, Fit Once
Ensure frame openings match product dimensions with 5mm–10mm clearance for adjustment.
2. Flashing & Waterproofing
Use flashing tape/membranes to prevent water ingress.
📘 AS 2047 – Windows & external glazed doors in buildings
3. Fixings & Fasteners
Use corrosion-resistant fixings. Fix through jambs, not frames.
📘 AS 4055 – Wind loads for housing
4. Level & Plumb Always
Use packers to level before fixing. Misalignment leads to operational issues.
5. Seal All Gaps
Use expanding foam or backer rod and sealant to close perimeter gaps.
📘 NCC Volume 2 – Housing Provisions, Part 3.5.3 Weatherproofing
6. Allow for Movement
Leave expansion space between frame and structure, especially in brick veneer walls.
7. Comply with Energy & Glazing Codes
Ensure compliance with energy ratings.
📘 AS 1288 – Glass in buildings: Selection and installation
📘 NCC Section J – Energy Efficiency (for commercial)
8. Fire & Bushfire Zones
Use BAL-rated products in bushfire-prone areas.
📘 AS 3959 – Construction in bushfire-prone areas
1. What areas do you service?
We install windows and doors across the Sydney metro area, including surrounding suburbs.
2. Do you supply the windows and doors, or just install them?
We can do both—either supply and install or install your pre-purchased products.
3. How long does a typical installation take?
Most standard installations are completed within a day, depending on site access and scope.
4. Are your installations compliant with Australian Standards?
Yes, all work complies with AS 2047, AS 1288, and the National Construction Code (NCC) for safety and quality.